Winch Stopper ATV-SCHS Cable Hook Rubber Stopper Winch Line Saver with Allen Wrench for ATV UTV Winches(Black-Orange)

Note: Wear leather gloves. 1)Freespool winch and pull out approx. 2 feet of cable. 2)Pull Hairpin and release clevis pin from winch hook. 3)Remove the four bolts fastening the two halves of the Split Cable Hook Stopper together. Place the cable or rope between the two halves. Insert the four bolts and tighten. 4)Re-attach hook to cable end. 5)To stow hook, engage clutch and retract cable onto winch spool until hook is snug against the hook stopper and fairlead. 6) Position hook stopper at approx. 3/4 of the total line distance towards hook while using you winch. Package Include: 2x two-piece design roller 8x screws 2 x inner hexagon wrenches

• For Trucks Jeeps SUV ATV UTV ORV Vehicle Boat Car
• Made of rubber, water repellent & abrasion resistant
• Used to avoid the cable to pull the hook to the bottom and stop the hook from getting jammed into the roller. Eliminate wear & tear on the roller from the hook and reduce noises when working
• All steel ropes, wires and synthetic cables up to 15/32" in diameter (12mm). Allow the ATV winch cable to run freely and slide, whilst keeping the line tidy. Protect your winching gear like never before
• Package includes: four-piece design rollers with 8 machine screws and 2 Allen wrenches